When we put the fence up, it looks fantastic. Due to a variety of factors, the fence begins to age and fade over time. The intense sunshine, filth, severe rain, snowfall, and other factors might be to blame. This results in the loss of original color and gloss, regardless of the ground.
Furthermore, it begins to change its hues to unfavorable shades of grey. But don’t fret; by repainting and redefining that old fence, you can restore its brilliance and sparkle. If you want your fence to appear as good as it did before, you’ll need to pressure wash it first.
I will tell you all about the pressure washing fence before staining!
The Importance Of Pressure Washing A Fence Before Staining
You might believe that the most essential aspect of staining a fence is applying the stain, but this isn’t fully true. Cleaning the fence before applying the stain is one of the most critical phases in the staining process. Power washing is an excellent and simple technique to clean a fence before staining it.
So, should I pressure wash my fence before staining? Yes, you should remove any previous finish and any built-up filth, dust, grime, or other contaminants from the fence before applying any sort of finish, including stains. If you don’t, it’s possible that your new stain won’t work at all.
Check out this picture to know the difference between pressure washing fence before and after:
If a fence is not pressure washed and cleaned before staining, the new stain will sit on top of the old stain, as well as anything else that may have been sitting on the fence’s surface, causing the new stain to peel off prematurely rather than entering the wood.
Do I need to pressure wash a new fence before staining? In this case, you won’t have to since your fence is clean enough for staining.
How To Pressure Wash And Stain Fence
Watch this video for the whole process:
Pressure Wash
Pressure washing fence before staining is a delicate process, and you can’t just start cleaning the fence with a pressure washer. Consider these tips while pressure cleaning a fence.
- Select the Right PSI for Your Pressure Washer: If you’re going to pressure wash the fence, you’ll need to select the appropriate PSI. A pressure washer with a PSI rating of 2000-2500 PSI can effectively clean dirt from wood without causing any damage.
- Select the Correct Nozzle: Using the incorrect nozzle might cause damage to the fence’s wood. Select a broad spray nozzle that sprays water at a wide-angle to remove dirt while avoiding harm to the wood.
- Prepare the Area: Before you begin pressure washing, clear the space around the fence. Remove any debris or loose items from the area, secure any electrical connections, and use protective equipment such as safety glasses, heavy shoes, and thick gloves. It’s preferable to dress in old clothing that you don’t mind getting dirty.
- Pressure Wash Carefully: To begin, pressure wash a small section of the fence to ensure that the pressure washer setting is right and that the wood of the fence is not damaged. So that the debris from the area does not reach you, pressure wash the fence from a distance.
Stain
It’s time for the huge event: fence staining! The best way to apply stain is with a natural-bristle paint brush. This helps the stain to penetrate the wood and provides a fantastic final outcome.
Start by dipping the tip of the brush into the stain container to apply wood stain to the fence. Coat any horizontal fence slats in a left-to-right direction. Coat vertical slats from top to bottom, all the way down the length of the slat. One to two slats at a time should be stained.
When applying stains, some individuals prefer to use a roller or sprayer instead of a brush. If it seems more appealing to you, go ahead and utilize that technique! When applying stain to a fence using a sprayer, remember to put a mask over your mouth and safety glasses.
Additionally, if you want to apply stain to your fence with a sprayer, avoid doing it on a windy day. This will keep the stain from getting wherever it shouldn’t – even on you!
How Can I Clean My Fence Of Green Algae, Mold, And Mildew?
Homemade Fence Cleaner
These basic items may be found in almost everyone’s kitchen. Don’t allow the fact that you’re confined indoors to limit your DIY projects. You can spend the time cleaning your fence (it’s almost free!) and get a jump start on the summer!
In your bucket, combine 1 gallon of water, 1 cup of vinegar, and some dish soap. If desired, add additional vinegar. Scrub it around with your wire brush to make sure it’s completely blended.
Wood Fence Cleaner
Mold Armor Fence, Deck, and Patio Wash is mildew and mold-killing bleach-based wood cleanser. It comes in a gallon container and aids in the restoration of worn or discolored fences.
Some store-bought cleaners have the added benefit of being able to attach a hose to the container and spray straight onto your fence. It saves you time!
Bleach
Algae, mold, and mildew may be removed from wood with diluted bleach. Anything growing on your fence will be killed by a mixture of 2 parts water to 1 part bleach. When working with bleach or other chemicals, always put on your protective gear. Use your power washer or a hose to rinse your fence afterward.
Conclusion
Pressure washing fence before staining is a difficult task. Before you begin, please do your study and investigate thoroughly. No matter how sure you are, it will take a significant amount of time and effort to complete.
Make a list of all the pro advice and stick to it. Remember to put on your protection gear and keep a safe distance while on your assignment. Best wishes!
Related Post
