If you’ve ever used a pressure washer, you know how beneficial it can be. It can deep clean numerous surfaces with high-pressure water, removing all dirt and debris collected over time. It’s an excellent method for keeping the area surrounding your home clean.
But, with such high pressure, it’s only natural that it uses a lot of water, mainly if you use it frequently. As a result, people often refer to pressure washers as “water guzzlers.” Is this correct?
Everything revolves on just one question: How much water does a pressure washer use?
Here’s what you need to know if you’re attempting to save money on your water bill and want to know whether you can minimize water use in any way.
How Much Water Does A Pressure Washer Use?
The average high-pressure washer for household usage has a flow rate of 1.8 GPM, corresponding to a maximum pressure of 2100 PSI.
High-pressure washers operate by applying pressure to the typical flow. Ten gallons per minute is the answer to the question, “How many gallons per minute does a pressure washer use?”
As a result, you should never use more water than your outlet can handle, which is 10 gallons per minute or 100 gallons for a ten-minute car wash.
Many pressure washers include an automated shut-off valve that prevents the flow of water from continuing while you’re cleaning your car or another surface. According to reports, such features make a significant impact, saving up to 70 gallons of water each 10-minute washing.
How Can A Pressure Washer Save Water?
A water hose has a considerably larger opening nozzle than a pressure washer. Instead of flowing out more softly like a hose, the water is pushed into a tiny opening, amplifying its force. This design provides pressure washers a significantly stronger water jet capable of dislodging dirt, grime, algae, and other debris.
How much water does a pressure washer use per minute? Less than a water hose!
Furthermore, utilizing a pressure washer charges the water molecules as they are sprayed out, allowing them to better adhere to filth and be cleaned away without the need for chemical cleaners.
As a result, the energy generated by a pressure washer results in a more environmentally friendly cleaning method.
How Can I Cut Down On My Water Consumption? Tips For Reduce Water Bill
You may do several things if you want to use a pressure unit while decreasing the quantity of pressure washer water usage as much as you can do.
Make Use Of Hot Water For Cleaning Various Surfaces
Cleaning various surfaces using hot water pressure washer is more effective than cleaning with cold water.
Warm water is preferable since it aids in the removal of dirt more effectively. It also cuts down on cleaning time and the amount of cleaning solution needed. You will use less water as a consequence.
If at all feasible, the water consumed should be between 160 and 210 degrees Fahrenheit. If you just require this machine for modest home cleaning tasks, a lightweight hot water pressure unit that you will use less than 5 hours a week would be enough.
Get A Pressure Washer With A Low GPM
As the name implies, GPM refers to the amount of water consumed.
So, if you want to save water, choose a pressure washer with a low GPM. A flow rate of less than 3 GPM is a decent place to start.
Several manufacturers are available, including the Mi-T-M WP 2500, which consumes 2.3 GPM while still producing a robust 2500 PSI, making it ideal for cleaning driveways, homes, and vehicles.
Wash Smartly
If you know how to wash correctly, you will not lose more water than is required, resulting in water conservation. For example, before using any detergent, you should consider conducting a small pre-soak on your automobile.
This consideration will save you water since all you have to do once you’ve finished using the detergent is rinse it off, and you’re ready to go. It will just take a few minutes to do this task.
You can only use up between 9 and 15 liters of water if you do it correctly.
How To Use A Pressure Washer Correctly?
Keep in mind that a pressure washer is vital equipment that, if handled incorrectly or carelessly, can cause harm. As a result, the unit must be handled with caution to avoid causing havoc on whatever is being cleaned.
Furthermore, understanding how to properly operate this equipment might result in reduced water waste during cleaning.
There are procedures to follow to ensure that the pressure washer is used properly.
Assemble Correctly
Take the item out of the box and thoroughly unpack it after you receive it. Make sure you have all of the necessary equipment in the package.
Read the instructions to learn how to assemble the tool correctly. If the item is electric, look for the connection of the power cord and connect one end of the high-pressure hose to one side of the garden hose.
The water supply or faucet should be linked to the other end of the garden hose.
Check out this video if you still don’t know how to assemble your pressure washer:
Choosing The Right Nozzle For Pressure Washer
Pressure washers have a variety of nozzle attachments. Unfortunately, some individuals mistake using the same nozzle to clean many objects, materials, and surfaces. Unfortunately, this approach reduces the effectiveness of cleaning with this equipment.
The O-degree, 15-degree, 25-degree, 40-degree, and 65-degree nozzles are designed to clean different surfaces and are available in various colors.
Conclusion
You can see the benefit these robust devices bring to the table since you know the answer to the question, “How much water does a pressure washer use?”.
Now you’re ready to go shopping for a pressure washer to clean your house and yard. As you gain experience with pressure washing, you’ll want to invest in these must-have pressure washer accessories to increase your productivity.
So go ahead, and pressure wash your way to a gleaming garage floor!
