Pressure washers have increasingly become essential household items. Nobody can argue with that, especially after witnessing what versatile cleaners they can be. With the help of a pressure washer, you may bring a unique shine to the outdoors.
What would you do if it started having problems? For example, what would you do with a pressure washer soap injector not working? If you’ve been dealing with this problem, you’ve come to the correct spot.
We have the most excellent solutions for you here and a few things you may do to avoid similar problems.
What Is A Pressure Washer Soap Dispenser?
If your pressure washer isn’t spraying soap properly, the fault is most likely with the soap dispenser, also known as the soap injector.
What exactly is a soap dispenser for a pressure washer? It is a tiny nozzle on a pressure washer that is used to spray soap. Every pressure washer comes with a variety of nozzles.
The other nozzles spray water, but there is always one whose primary purpose is to spray soap and mix it with the water for a single efficient spray. That is the soap dispenser nozzle. It may suck soap from the pressure washer’s detergent tank.
As you spray, the soap dispenser mixes soap with water. It is usual to first spray soap on any surface before repeatedly spraying water to clean it up.
As a result, if something occurs to the soap dispenser, it is a concerning development since it implies a reduction in cleaning efficiency. That is why you must understand how to repair it.
Before we get into how to fix your pressure washer soap injector, let’s look at the most common reasons for the problem.
Why Would A Pressure Washer Need Soap?
In many cases, the pressure (and occasionally heat) provided by a pressure washer is sufficient. It’s also a good idea to utilize only water whenever feasible because it’s more environmentally friendly. However, in other situations, water alone may not be sufficient to complete the task.
In some cases, you’ll need a bit more to get everything clean. For example, soap can be more effective in places that are exceedingly unclean or just do not react to water alone. In certain circumstances, you may even be able to discover soaps that are both effective and environmentally friendly.
With a pressure washer, you may use nearly any liquid soap or detergent. However, there are pressure washer-specific detergents for all applications. Your pressure washer will include a siphon hose or basin that you may fill with the soap of your choice. Make sure any detergent cutoff valves are turned on, and then use the pressure washer as usual.
Why Does Your Pressure Washer Soap Injector Not Working?
-
High-pressure nozzle
If the intake water jet is exceptionally high in pressure, the chemical injector will not function. A high-pressure water jet can be caused by one of two factors. The use of a high-pressure nozzle is the first reason. The second explanation might be that the water supply valve was opened, allowing the water pressure to be extremely high, causing the injector not to draw the detergent.
Continue to change the position of the water supply valve. The water pressure will fluctuate and reach a point where the detergent draws together with the supply from the hose.
-
Blockages
Clogging at the nozzle or valve region is another typical issue with pressure washer chemical injector not working. This is often caused by dirt getting into the chemical tube. You can remove the debris from the afflicted region and inspecting the tube, nozzle, and valve to determine which part is damaged. You can avoid clogging by using a chemical filter on the tube. This filter will keep dirt and debris from adhering to or passing through the chemical tube.
-
Broken parts
Clogging or obstruction in the tubes is caused by debris and worn-out components that need to be replaced. This does not imply that you need to purchase a new chemical injection kit. It does, however, imply that other faulty sections are the reason why the pressure washer soap dispenser doesn’t work.
The easiest method to accomplish this is to remove the pump’s hose and other attachments and inspect the device for good operation. If it siphons detergent, the issue is with one of the hose’s components. Then, one by one, replace all of the parts, such as the soap injector, valve, nozzle, and so on. If the soap is not siphoned at any stage, you will be able to know.
How To Fix Pressure Washer Soap Injector – Soap Injector Troubleshooting
If you notice the power washer soap dispenser not working after a lengthy period, you may need to repair it by changing the spring and ball inside it. You will need to take the following actions to do this.
- First, remove the soap injector from your pressure washer and place it on the table.
- Repeat the operation to open the soap input screw; within, you’ll find a conical spring.
- Next, remove the conical spring and the metal ball from within. Then, using a metal rod, remove the rubber ring as well. You must replace the ball and ring.
- Remove the replacement ball and ring from their packaging.
- Apply some oil to the ring and ball to prevent the ball from becoming caught on the ring again.
- Place the ring inside your injector first, followed by the ball and spring. Make sure that the narrow end of your spring hits the ball.
- Screw the soap input screw over the spring and tighten it securely.
Your soap injector is now ready for use. Attach it to your pressure washer and move it in the direction of the water flow.
Check out this video for more ideas on why pressure washer soap dispenser doesn’t work:
How To Maintain Your Pressure Washer
The following are some additional pressure washer maintenance suggestions that might assist you in preventing the pressure washer not siphoning detergent situation and maintaining your machine in the best condition.
Consider the following suggestions for your pressure washer:
- First, check to see if any extensions or hoses are blocked. If they are, make sure to replace or clean them out before storing them.
- When you’re finished using the detergent, remove it from the machine.
- Check all of your nozzles and add-ons to ensure you have them all, and put them somewhere they can be readily located again.
- Examine your high-pressure hose to ensure it is in excellent condition. Replace it if you see any damage or bulges.
- If you’ve been running a garden hose as part of your setup, you’ll also need to flush that out.
- Check that any pressure in the machine has been released; you don’t want it to build up while the machine is merely resting.
- Disconnect and store all of your hoses and connectors carefully.
Conclusion
When you need to use soap to clean your pressure washer, you may encounter specific difficulties like pressure washer chemical injector not working. However, with the proper diagnosis, you can typically cure the problem fast. Furthermore, incorporating some after-use maintenance might aid in preventing similar difficulties in the future.
If the problem persists, you can seek assistance from the manufacturer of your specific pressure washer. They may be pretty helpful in ensuring that you obtain the answers you require for your equipment, especially if it is still under warranty.
Related Post
